Hot Products:

KY SERIES DTH DRILLING RIG

  • KT SERIES DTH DRILLING RIG
  • Stationary AIR Compressors
  • Portable Air Compressor
  • Drilling Tools
  • KY125 Crawler DTH DRILLING RIG

    KAISHAN BRAND | open-air mining equipment

     

     

    Description of KY125 Crawler DTH DRILLING RIG :


    KY125 medium pressure crawler drilling rig is a piece of mature open-pit mining equipment. It has powerful propulsion and rotating mechanisms and a centralized operation control system. The detailed information is described below.


    Features of KY125 Crawler DTH DRILLING RIG :

     

    Powerful propulsion and rotating mechanisms
    The rotating mechanism is driven by a high-power hydraulic motor, which can provide powerful torque reserve. Thus the drill bit is less likely to be jammed. The super power hydraulic motor driven propulsion mechanism can generate as high as 20kN rising power to adjust the pressure regulating valve on the propulsion pilot valve, so that a proper propelling force for our medium pressure crawler drilling rig can be achieved.


    Centralized operation control system
    The advanced hydraulic system and pneumatic system are under centralized control, making the operation quite simple. The hydraulic operating valve can make the drill boom rise and swing, and drive the drill rig pitch, tilt, move forward and backward, and so on. The drilling performance of our medium pressure crawler drilling rig is quite stable. By controlling the pneumatic valve, you can make the oil pump start-up, and drive the vehicle advance, lift, rotate, strike, and so on. Thus the drilling vehicle could achieve a high drilling efficiency.

     

     

     

    Specification of KY125 Crawler DTH DRILLING RIG :

     

    Model

    Specification

     KY125

    Rock hardness

    F=6-20

    Hole diameter(mm)

    105-140

    optium Drill depth(m)

    25

    Pressure (Mpa)

    1.0-2.4

    Air consumption(M3/min)

    ≥15

    Rotating speed (Km/h)

    0-70

    Lifting capacity (KN)

    18

    Drill rod specification(mm)

    76×3000

    /89×3000

    Gradeability

    30°

    Ground clearance(mm)

    320

    Walking speed (km/h)

    2.0

    Drill arm rising angles (°)

    -15~+50

    Drill arm swing angle (°)

    ±45

    Carriage swing angle(°)

    ±50

    Carriage pitch angle (°)

    180

    Carriage Compensation(mm)

    1200

    Overall Dimension

    (L*W*H)(mm)

    5600×2340

    ×2550

    Total Weight (Kg)

    5500

    Note:

    Pneumatic

    -hydraulic

     

    Recommanded air compressor for KY125 Crawler DTH DRILLING RIG: :

     

    Model

    Work pressure (Mpa)

    Capacity (m3/min)

    Diesel engine

    (hp)

    Weight (kg)

    Dimension (mm)

    LGCY-15/13

    1.5

    15

    YuChai YC6A-240-20 or steyr  WD415.23

    3350

    3380*1650*2500

     

     

     


     

    ©All rights: KAISHAN Group - China Leading Manufacturer & Designer in Drilling Rig, Screw AIR Compressors